ISO PRIM

Description

ISO PRIM is a quick-drying insulator which is specially developed as an undercoat for wall paints and perfectly suited for the localized treatment of mildew, soot, nicotine, … stains on walls, ceilings etc. Suitable for inside and outside applications.

ISO PRIM has outstanding insulating properties and excellent covering power. It sticks to the most various surfaces and stains showing through, but it is also perfectly suited as undercoat on panelling materials such as for example MDF, chipboard, etc.

All these properties make ISO PRIM indispensable for finishing new building and renovation projects; a must-have for each painter and professional finishing company! Due to the short drying time of the product, repairs won’t get delayed and ISO PRIM is perfectly sandable and scrub-resistant. Moreover, it can be painted over with almost all dispersion, alkyd and water-based acrylic paints.

Thanks to its unique composition ISO PRIM complies with the European VOC regulations, which means that it is perfectly suitable for inside applications. But of course it can also be used for outside applications.

The handy spray can with adjustable nozzle makes ISO PRIM very economical and easy to use.

Properties

• White in colour after drying (similar to RAL 9003).
• Exceptional covering power due to the high solids content.
• Good adhesion to almost any material used in construction, also cladding & panelling materials such as for example MDF.
• Quick-drying and perfectly sandable.
• Unique flat spray pattern through the adjustable nozzle and solid capacity.
• Paintable with almost all water-based and synthetic paint systems.
• Fully compliant with the European VOC regulations, so also suitable for inside applications.

Instructions for use

• Surface preparation: Make sure that the surface is clean, dry and free of dust and grease. Sand it if necessary and clean with Innotec Easy Clean.
• Application method: Shake can well during at least 2 minutes before use. Make sure that the surface is clean, dry and free of dust and grease. Sand it if necessary and clean with Innotec Easy Clean. Spraying distance ± 25 cm. The best result will be achieved when the product is applied in several criss-cross layers, depending on the type of surface and contamination. When applying several layers leave 5 minutes for the product to evaporate before applying the next layer

Technical information

• Base: Chemically reinforced acrylate
• Density: 850 kg/m³
• Consistency: Liquid (ready-to-use in aerosol)
• Solvents: Organic solvents
• Flash point: < 0°C
• Temperature resistance: -20°C to +110°C
• UV resistance: Excellent
• Odour: Characteristic
• Application conditions: +15°C to +30°C
• Type of surface: Inside and outside plaster, concrete, wood and MDF
• Surface preparation: Make sure that the surface is clean, dry and free of dust and grease. Sand it if necessary and clean with Innotec Easy Clean.
• Application method: Shake can well during at least 2 minutes before use. Make sure that the surface is clean, dry and free of dust and grease. Sand it if necessary and clean with Innotec Easy Clean. Spraying distance ± 25 cm. The best result will be achieved when the product is applied in several criss-cross layers, depending on the type of surface and contamination. When applying several layers leave 5 minutes for the product to evaporate before applying the next layer
• Dust dry: 7 to 10 minutes (at 20°C / 65% relative humidity)
• Recommended layer thickness: Sttrongly dependent on the type of surface and contamination
• Sandability: Excellent after 15 minutes (P220/P320)
• Paintability: Can be painted over after 20 minutes (at 20°C) with almost all water-based and synthetic paint systems
• Cleaning of materials used: With Innotec Multisol
• Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
• Shelf life: 1 year in original, unopened packaging
• Storage conditions: Store cool and dry
• Type of batchcode: F
• EAN Code: 5400563007976