Spot Primer Anthracite

Description

Spot Primer is a fast drying, corrosion-resistant 1K insulation primer for treating the last remaining sanded-through spots in the primer or clear coat (before spraying the base coat).

Spot Primer adheres perfectly to just about any treated or untreated surface such as steel, galvanised steel, aluminium, stainless steel, wood, plaster and most types of plastic. Due to its unique composition Spot Primer is suitable as a base layer for just about every type of modern paint system (prior testing is required).

Due to its extremely fast drying, Spot Primer is dust dry after 5 minutes and can be painted over after 15 minutes. The excellent fluidity created by its unique composition of resins and solvents means that Spot Primer produces an ultra smooth surface that requires little or no sanding. And this unique composition makes Spot Primer resistant to just about every kind of modern degreaser.

Spot Primer is available in different colours. Due to this choice of different colours, optimal covering can be obtained with almost all existing basic colours which will considerably reduce the risk of visible edges showing up.

Thanks to its aerosol packaging Spot Primer is extremely user-friendly and easy to apply. The product comes with a special nozzle, which creates a professional spray pattern with no over-spray, exactly like the cone of a spray gun. The nozzle is adjustable, so that the product can be sprayed horizontally and vertically.

See also: Alu Scratch Repair System

Properties

• Perfectly suited for sanded-through edges and spots.
• Excellent adhesion to the most common surfaces.
• Very fast drying and hardening.
• Excellent fluidity.
• Good resistance to most degreasers.
• Can be sprayed over using just about any modern paint system (prior testing is required).
• Professional spray pattern.

Instructions for use

• Surface preparation: The surface must be clean, dry and free of dust and grease. Sand the surface and clean with Innotec Multisol. Clean plastic surfaces with Innotec Repaplast Cleaner Antistatic and pre-treat them with Innotec Repaplast Primer.
• Application method: Shake can well during at least 2 minutes before use. Spraying distance 15-20 cm. Apply in 2 smooth layers. Leave 5 minutes for the product to evaporate between the two layers. After use, invert can and spray until clear to clean the nozzle.

Technical information

• Base: Nitro-cellulose alkyd resin
• Density: 770 kg/m³
• Consistency: Liquid (ready-to-use in aerosol)
• Solvents: Mixture of aromatic and aliphatic hydrocarbons
• Flash point: < 0°C
• Temperature resistance: -20°C to +110°C
• UV resistance: Good
• Water resistance: Very good
• Solvent resistance: Very good
• Application conditions: +15°C to +25°C
• Type of surface: Sanded old paint layers, steel, electrolytic zinc covered steel, aluminium, stainless steel, wood, putty and most plastics
• Surface preparation: The surface must be clean, dry and free of dust and grease. Sand the surface and clean with Innotec Multisol. Clean plastic surfaces with Innotec Repaplast Cleaner Antistatic and pre-treat them with Innotec Repaplast Primer.
• Application method: Shake can well during at least 2 minutes before use. Spraying distance 15-20 cm. Apply in 2 smooth layers. Leave 5 minutes for the product to evaporate between the two layers. After use, invert can and spray until clear to clean the nozzle.
• Open time: Max. 24 hours
• Dust dry: After ± 5 minutes (at 20°C / 65% relative humidity)
• Curing time: ± 45 minutes (at 20°C / 65% relative humidity / 30µ layer thickness)
• Recommended layer thickness: 30µ
• Sandability: After ± 10 minutes (at 20°C) (both wet and dry, by hand and by machine)
• Paintability: After ± 15 minutes (at 20°C), with almost all modern paint systems. Due to the huge variety of paint types on the market, it is best to test the paint beforehand. Please observe the instructions of the relevant paint manufacturer.
• Cleaning of materials used: With Innotec Multisol
• Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
• Shelf life: 2 years in original, unopened packaging
• Storage conditions: Store cool and dry
• Type of batchcode: F
• EAN Code: 5400563007785