Repair Finish

Description

Repair Finish is part of the Innotec Stone Chip Repair System. It is a softening agent used to polish the paint-filled stone-chip damage flush with the original paintwork. It also provides shine and protection for stone chip repairs.

See also:
Stone Chip Repair System
Stone Chip Repair System Compact

Properties

No product information available

Instructions for use

• Surface preparation: The surface must be clean, dry and free of grease. Clean the surface with Innotec Adhesion Activator.
• Application method: Shake the bottle before use. Wrap a Multi Wipe folded in two around the Blue Plastic Card and apply a small amount of Repair Finish to this. Wrap a Multi Wipe around the yellow Polish Block. Rub the card over the paint-filled stone-chip damage a few times until it reduces and then use the polishing block to polish the filled stone chip. When all the stone chips are treated, use a Multi Wipe to carefully rub in a thin layer of Repair Finish, with circular movements. After treatment allow the surface to dry and rub with a clean, dry Multi Wipe. Then treat the surface with a damp Inno-Cleaner, rubbing with circular movements, and rub down with a Multi Wipe.
  See also the directions for use of the Innotec Stone Chip Repair System.

Technical information

• Base: Mixture of waxes, silicones and solvents emulsified in water
• Density: 989 kg/m³
• Consistency: Thick fluid
• Viscosity: ± 900 mPa.s
• Solvents: Mixture of alcohol and esters
• Flash point: 13°C
• Additions: Wax and oil
• Application conditions: +10°C to +30°C
• Type of surface: The most common paint systems
• Surface preparation: The surface must be clean, dry and free of grease. Clean the surface with Innotec Adhesion Activator.
• Application method: Shake the bottle before use. Wrap a Multi Wipe folded in two around the Blue Plastic Card and apply a small amount of Repair Finish to this. Wrap a Multi Wipe around the yellow Polish Block. Rub the card over the paint-filled stone-chip damage a few times until it reduces and then use the polishing block to polish the filled stone chip. When all the stone chips are treated, use a Multi Wipe to carefully rub in a thin layer of Repair Finish, with circular movements. After treatment allow the surface to dry and rub with a clean, dry Multi Wipe. Then treat the surface with a damp Inno-Cleaner, rubbing with circular movements, and rub down with a Multi Wipe.
  See also the directions for use of the Innotec Stone Chip Repair System.
• Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
• Shelf life: 2 years in original, unopened packaging
• Storage conditions: Store cool and dry
• Type of batchcode: F
• EAN Code: 5400563023563