Topfix Black 2-Component Mixture

Description

Topfix is a quick and easy 2-component gluing product specifically designed for use in many different applications. Topfix has excellent adhesive power and can be used on many different surfaces, including plastic, metal, wood, etc. The product dries ultra fast, so that the glued part can generally be used again after 10 minutes.

Thanks to its unique formula, Topfix offers extremely strong gluing results. Topfix is also flexible to a certain extent, which allows the product to be used for a variety of applications. When combining the use of Topfix with Repaplast Primer, you will get a unique combination of products which can even be used on the most difficult surfaces such as recycled plastic, natural stone, metal, stainless steel and PMMA.

Thanks to its unique properties, Topfix makes it possible to glue objects that were impossible to glue before. It also allows you to repair parts, which you would normally throw out. Topfix is also perfect for a wide range of emergency repairs.

Topfix offers great firm results and has an extended spray clean interval. This makes it perfectly suitable for vertical glue joints that cannot be glued or modelled in one go.

Topfix is very user-friendly and can be dosed very accurately thanks to the handy dual cartridge and the use of the Mixer Gun. The special mixer nozzle ensures the right mixture proportions and prevents the remaining product from hardening in the cartridge. This means that an opened cartridge of Topfix can still be kept for a long time.

Properties

• Excellent adhesive power on many different surfaces.
• Ultra fast drying.
• Glued part can be handled soon after application.
• Very firm.
• Good temperature resistance.
• 2-component product for quick gluing.
• Handy dual cartridge with mixer nozzle for accurate application.
• NSF registered (class P1), register number 148956.

Instructions for use

• Surface preparation: The surface must be clean, dry and free of grease. Clean surfaces with Innotec Repaplast Cleaner Antistatic. In case of (recycled) plastic or surfaces that are difficult to treat such as stainless steel for example, we recommend the use of Innotec Repaplast Primer.
• Application method: Because Topfix dries so quickly, set out all the tools you will need before starting the repair or gluing. Fix the mixer nozzle to the double cartridge. When using a new cartridge for the first time, always squeeze out and discard the first two centimetres, to guarantee an optimal mix of the Topfix. After use, do not remove the mixer nozzle; exchange it the next time you want to use the product. Gather up the parts to be glued and roughen or sand the contact surfaces. Clean the parts using Innotec Repaplast Cleaner Antistatic. If necessary, pre-treat with Innotec Repaplast Primer. Use the mixer nozzle to spread the Topfix on the surface and join the parts to be glued together as quickly as possible, within 10 seconds. Keep the repair area fixed for a short time until the Topfix has strengthened sufficiently. The repaired part can be treated again after 10 minutes. This includes milling, drilling, tapping, etc.

Technical information

• Base: 2 component polyurethane
• Density: ± 1100 kg/m³
• Consistency: Pasty
• Hardness: 75 (Shore D)
• Tensile strength: ± 40 N/mm² (according to DIN 53504)
• Elongation at break (%): ± 25% (according to DIN 53504)
• Temperature resistance: -40°C to +90°C
• UV resistance: Moderate. UV does affect the product if left uncoated and in direct sunlight. Once coated with a top coat or primer the product is UV resistant.
• Water resistance: Excellent
• Solvent resistance: Excellent
• Acid resistance: Good
• Shrinkage: < 1% after full cure
• Tests: Registered by NSF (class P1), register number: 148956
• Application conditions: +5°C to +35°C
• Type of surface: Many surfaces such as plastics, metal, glass, wood, natural stone, tiles, etc.
• Surface preparation: The surface must be clean, dry and free of grease. Clean surfaces with Innotec Repaplast Cleaner Antistatic. In case of (recycled) plastic or surfaces that are difficult to treat such as stainless steel for example, we recommend the use of Innotec Repaplast Primer.
• Application method: Because Topfix dries so quickly, set out all the tools you will need before starting the repair or gluing. Fix the mixer nozzle to the double cartridge. When using a new cartridge for the first time, always squeeze out and discard the first two centimetres, to guarantee an optimal mix of the Topfix. After use, do not remove the mixer nozzle; exchange it the next time you want to use the product. Gather up the parts to be glued and roughen or sand the contact surfaces. Clean the parts using Innotec Repaplast Cleaner Antistatic. If necessary, pre-treat with Innotec Repaplast Primer. Use the mixer nozzle to spread the Topfix on the surface and join the parts to be glued together as quickly as possible, within 10 seconds. Keep the repair area fixed for a short time until the Topfix has strengthened sufficiently. The repaired part can be treated again after 10 minutes. This includes milling, drilling, tapping, etc.
• Tack free: 50 seconds (with a layer thickness of 5 mm)
• Curing time: 1 hour
• Sandability: Moderate after 15 minutes
• Paintability: Reasonable after ± 60 minutes. Compatible with almost all modern priming systems and paints.
• Cleaning of materials used: With Innotec Repaplast Cleaner Antistatic
• Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
• Shelf life: 1 year in original, unopened packaging
• Storage conditions: Store cool and dry
• Type of batchcode: F
• Remarks: As from 24 August 2023 adequate training is required before industrial or professional use.
  Further information available at www.feica.eu/PUinfo
• EAN Code: 5400563027943