Acryfill

Description

Acryfill is a high-quality plasto-elastic sealant based on acrylic dispersion and rainproof quickly after application. The product is highly suited to seams and seals on indoor and outdoor applications subject to minimal settling.

Acryfill is suitable for seams and seals with 12,5% settling. This means the product is highly suited to window, wall and ceiling joints. But Acryfill can also be used to finish skirting board seams, cracks and shrink seams in wood and stony surfaces such as plastering.
Acryfill is water-based and 100% solvent-free. The product is paste-like and has a very good constancy. This means that Acryfill is ideal for horizontal and vertical seams.

Acryfill is very easy to use because it has a “very short structure”, and so does not string. In addition, Acryfill is easy to finish with a damp sponge, so that you do not need a smoothing agent.

The handy packaging in 310 ml cartridges makes Acryfill easy to use and economical. For best results we recommend to apply Acryfill using the InnoQuip Pro 2000 Gun, Easy Grip Gun or Air Sealant Applicator 300 and to finish it with a damp sponge or spatula.

Properties

• Can be used indoors and outdoors.
• Good processing properties.
• Plasto-elastic; maximum distortion of 12,5%.
• Water-based; solvent-free.
• Simple to use.
• Can perfectly be painted over with water-based and synthetic paint systems after full curing.

Instructions for use

• Surface preparation: The surface must be clean, dry and free of grease. Clean the surfaces with Innotec Multisol or Innotec Seal and Bond Remover. Very porous surfaces should be pre-treated with a primer. For this purpose Acryfill can be diluted with water in the proportion 2:1.
• Application method: Apply directly from the cartridge using a glue gun (InnoQuip Pro 2000 Gun, Easy Grip Gun or Air Sealant Applicator 300). Smooth using a putty knife or spatula. If required, wipe the surface using a moist sponge.

Technical information

• Base: Acrylic dispersion
• Density: 1650 kg/m³
• Consistency: Pasty
• Solvents: No solvents
• Hardness: 24 (Shore A)
• Tensile strength: 0,29 N/mm² (ISO 37 rod S1)
• Elongation at break (%): > 400% (ISO 37 rod S1)
• Modulus: 0,23 N/mm² (100% elongation) (ISO 37 rod S1)
• Elastic recovery: < 50% (ISO 7389)
• Temperature resistance: -30°C to +80°C
• UV resistance: Good (for outdoor applications, always finish with a paint system)
• Water resistance: Not resistant to prolonged contact with water. Not resistant to driving rain and hail during skin formation.
• Slump resistance (stability): Good
• Application conditions: +5°C to +40°C
• Type of surface: Acryfill can be used inside and outside on all porous surfaces such as concrete, stone, wood, etc.
• Surface preparation: The surface must be clean, dry and free of grease. Clean the surfaces with Innotec Multisol or Innotec Seal and Bond Remover. Very porous surfaces should be pre-treated with a primer. For this purpose Acryfill can be diluted with water in the proportion 2:1.
• Application method: Apply directly from the cartridge using a glue gun (InnoQuip Pro 2000 Gun, Easy Grip Gun or Air Sealant Applicator 300). Smooth using a putty knife or spatula. If required, wipe the surface using a moist sponge.
• Skin formation: 22 minutes (23°C / 50% relative humidity)
• Tack free: ± 2 hours (23°C / 50% relative humidity)
• Curing time: 0,5 mm in 24 hours (23°C / 50% relative humidity)
• Minimum joint width: 4 mm
• Maximum joint width: 20 mm
• Maximum admissible deformation: 12,5%
• Paintability: Good. Can be painted over with water-based and synthetic paint systems after full curing. We recommend that the product is painted over in the case of outside applications. Due to the huge variety of paint types on the market, it is recommended to pre-test with the paint type in question.
• Cleaning of materials used: With Innotec Multisol
• Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
• Shelf life: 1 year in original, unopened packaging
• Storage conditions: Store cool and dry
• Type of batchcode: F
• Other details: Innotec Acryfill is not suitable for use as a glazing sealant.
• CE Certification: Innotec Acryfill is a product with CE mark in accordance with Regulation (EU) 305/2011.
  CE EN 15651-1 F-EXT-INT 12,5P
• EAN Code: 5400563003114