Airco Clean Control 250 ml

Art.: 04.0159.9999
Aerosol can 250 ml

Airco Clean Control is a unique professional cleaner for air conditioning systems. Airco Clean Control removes dirt at the source: the evaporator. In addition to perfect cleaning, the product provides optimal comfort and a pleasant scent.

More info
This product is currently not available for order.
Please contact your local distributor.

Safety data sheet

To order, please contact your distributor

Description

Airco Clean Control is a unique professional cleaner for air conditioning systems. Airco Clean Control removes dirt at the source: the evaporator. In addition to perfect cleaning, the product provides optimal comfort and a pleasant scent.

Airco Clean Control is the ideal solution for a perfect cleansing of the A/C system. Airco Clean Control is extremely easy to use - it applies a dense foam to the evaporator in the A/C system. Airco Clean Control completely dissolves all deposits of dirt, leaving a fresh odour behind. The liquid residue leaves the system via the condensate drain.

Airco Clean Control is extremely user-friendly. The product is supplied in an aerosol, which comes with a special long hose with nozzle (Tube). The hose is used to apply the product to the evaporator coil. The 250 ml content is sufficient to clean the A/C system completely.

Properties

  • Removes dirt at the source: the evaporator.
  • Ultra-active and strong foam with long-working ingredients.
  • Provides optimal comfort.
  • Pleasant odour.

Instructions for use

  • Application method: The person who is going to carry out the treatment should have sufficient knowledge of the air conditioning system to be cleaned. Switch off the air conditioning system a few minutes before the treatment, this to make sure that the evaporator is not cold or moist anymore. For optimum cleaning it is important to apply the foam as close as possible to the evaporator. This can be done by removing some components (ventilation resistor, interior filter, ventilation motor, etc.) so that the spray nozzle at the end of the long tube can get close to or against the evaporator. In some cases it is also possible to clean the evaporator through the condensation water exhaust. If necessary, remove components that might be damaged during the treatment. When the design of the system requires it, the method of use may be varied to achieve the greatest cleaning results. Depending on the size of the system to be treated, use a maximum of 1 aerosol can per system. Allow at least 15 minutes for the product to take effect, then switch the fan at slow speed for 5 minutes. Now the air-conditioning system is clean and functional. For best results, refrain from using the air-conditioning for a few hours.

Technical information

  • Base: Active foam made from surface active substances
  • Density: ± 957 kg/m³
  • Consistency: White foam
  • Solvents: Water and glycol ethers
  • Flash point: < 0°C
  • Foam stability: Very good
  • Application conditions: +10°C to +30°C
  • Type of surface: Air conditioning evaporators
  • Application method: The person who is going to carry out the treatment should have sufficient knowledge of the air conditioning system to be cleaned. Switch off the air conditioning system a few minutes before the treatment, this to make sure that the evaporator is not cold or moist anymore. For optimum cleaning it is important to apply the foam as close as possible to the evaporator. This can be done by removing some components (ventilation resistor, interior filter, ventilation motor, etc.) so that the spray nozzle at the end of the long tube can get close to or against the evaporator. In some cases it is also possible to clean the evaporator through the condensation water exhaust. If necessary, remove components that might be damaged during the treatment. When the design of the system requires it, the method of use may be varied to achieve the greatest cleaning results. Depending on the size of the system to be treated, use a maximum of 1 aerosol can per system. Allow at least 15 minutes for the product to take effect, then switch the fan at slow speed for 5 minutes. Now the air-conditioning system is clean and functional. For best results, refrain from using the air-conditioning for a few hours.
  • Cleaning of materials used: With water
  • Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
  • Shelf life: 2 years in original, unopened packaging
  • Storage conditions: Store cool and dry
  • Type of batchcode: F
  • Other details: The propellant in the foam is flammable. Therefore ventilate well before turning on the system!
  • EAN Code: 5400563018521

Only quality has a future