High-Tef Oil 500 ml

Description

High-Tef Oil is a high-grade PTFE-based lubricating oil that provides extremely good lubrication under high pressure and within a wide temperature range from -50°C up to +250°C.

The PTFE remains intact over the decomposition temperature of the oil, as a result of which it retains perfect lubrication. Since dampness is repelled by this and because High-Tef Oil contains corrosion resistant ingredients, the product is particularly well suited to the treatment of difficult-to-access places where moisture can accumulate.

Due to its low frictional resistance and high penetrating power the product is ideal for use as a general lubricant for door stops, hinges, wiper mechanisms, window guides and other lubrication points. Additionally, it is an excellent transparent lubricant for places where grease would lead to an accumulation of dirt. What we have in mind here are lock plates and locks.

Because it cannot be washed away by water it is also perfectly suited to the many moving parts subject to the influence of weather. When applied during disassembly it helps facilitate the dismantling of seized parts.

The aerosol packaging makes High-Tef Oil very user-friendly and easy to use. Thanks to the unbreakable nozzle with straw, even hard-to-reach places can be treated without any problem. In addition, the aerosol is equipped with a special valve that allows it to be used in any position.

For ease of use, as a lubricant en route for example, or for retail, High-Tef Oil is also available in 75 ml cans.

Properties

• Provides perfect long-lasting lubrication.
• Loosens seized parts.
• Low frictional resistance.
• Wide temperature range (-50°C to +250°C).
• Repels moisture.
• Protects against corrosion.
• Also suited to lubricate most plastic parts.
• OEM approved.
• Silicone free.

Instructions for use

• Surface preparation: The surface must be clean, dry, free of grease and non-corroded. Clean surfaces with Innotec Multisol, Innotec Ultra Clean or Innotec Power Clean.
• Application method: Shake well before use. Spray directly on the part to be lubricated and leave a short time to evaporate.

Technical information

• Base: Viscous base oil (ISO 220) with corrosion resistant components, enriched with a micronised PTFE additive
• Density: 773 kg/m³
• Consistency: Thick liquid (ready-to-use in aerosol)
• Viscosity: ± 750 mPa.s (20°C)
• Flash point: < 0°C
• Pressure resistance: Very good thanks to addition of PTFE
• Temperature resistance: -50°C to +250°C (becomes more solid with temperatures under 0°C)
• Water resistance: The oil has good water repellent properties and does not saponify.
• Acid resistance: Resistant to diluted acids
• Corrosion resistance: Good
• Penetration ability: Very good, thanks to the addition of fluorine surfactants
• Percentage of greasing agent: ± 60%
• Application conditions: +5°C to +40°C
• Type of surface: All kind of metals and most plastics
• Surface preparation: The surface must be clean, dry, free of grease and non-corroded. Clean surfaces with Innotec Multisol, Innotec Ultra Clean or Innotec Power Clean.
• Application method: Shake well before use. Spray directly on the part to be lubricated and leave a short time to evaporate.
• Cleaning of materials used: With Innotec Multisol or Innotec Power Clean
• Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
• Shelf life: 2 years in original, unopened packaging
• Storage conditions: Store cool and dry
• Type of batchcode: F
• Other details: Never spray on when the surface is too hot (> 90°C) since poisonous gasses may be released through accelerated vaporisation.
  OEM approved
• EAN Code: 5400563017050