Inno-Seal 290 ml White

Description

Inno-Seal is a unique MS polymer based and permanently elastic sealant with adhesive properties. The product is suitable for gluing and sealing and provides good adhesion to almost any surface in automotive, construction, wood industry and metalworking. It is very quick to form a skin, fast curing, and extremely flexible.

Inno-Seal contains no solvents, so that the bonding or sealing is virtually shrink-free. Neither does the product contain isocyanates. It can be sprayed over easily with just about any modern paint system, even wet-on-wet, thus saving an enormous amount of time.

Inno-Seal is also perfectly suited for application between two parts before spot welding.

The handy 290 ml cartridges make Inno-Seal very economical and easy to use.

Properties

• No solvents.
• No isocyanates.
• Odourless.
• Can be sprayed/painted over immediately with just about every modern lacquer.
• Perfect adhesion.
• EMICODE EC1 Plus certified (licence number 12204/13.04.18).

Instructions for use

• Surface preparation: The surface must be clean, dry and free of grease. Clean surfaces with Innotec Multisol or Innotec Seal and Bond Remover. Clean plastic surfaces with Innotec Repaplast Cleaner Antistatic. Plastic, porous or extremely difficult surfaces must be pre-treated with Innotec Repaplast Primer or Innotec Seal Guard.
• Application method: Apply directly from the cartridge using a glue gun (Pro 2000 Gun, Easy Grip Gun or Air Sealant Applicator 300). When gluing, join the parts together within 10 minutes. If necessary smooth with Innotec Seal Fluid and a spatula.

Technical information

• Base: MS polymers
• Density: ± 1600 kg/m³
• Consistency: Pasty
• Solvents: No solvents
• Hardness: ± 40 (Shore A)
• Tensile strength: ± 1,60 N/mm² (according to DIN 53504)
• Elongation at break (%): ± 340% (according to DIN 53504)
• Modulus: ± 0,90 N/mm² (at 100% elongation) (according to DIN 53504)
• Shear strength: 1,10 N/mm² (volgens DIN 53283)
• Elastic recovery: ± 70%
• Temperature resistance: -40°C to +90°C
• UV resistance: Good. Slight change in colour may appear.
• Water resistance: Good
• Slump resistance (stability): Good
• Tests: EMICODE EC1 Plus certified (licence number 12204/13.04.18)
• Application conditions: +5°C to +35°C
• Type of surface: Metal, aluminium, many plastics, concrete, wood, stone
• Surface preparation: The surface must be clean, dry and free of grease. Clean surfaces with Innotec Multisol or Innotec Seal and Bond Remover. Clean plastic surfaces with Innotec Repaplast Cleaner Antistatic. Plastic, porous or extremely difficult surfaces must be pre-treated with Innotec Repaplast Primer or Innotec Seal Guard.
• Application method: Apply directly from the cartridge using a glue gun (Pro 2000 Gun, Easy Grip Gun or Air Sealant Applicator 300). When gluing, join the parts together within 10 minutes. If necessary smooth with Innotec Seal Fluid and a spatula.
• Skin formation: ± 10 minutes (23°C / 50% relative humidity)
• Tack free: ± 4 hours (at 23°C / 50% relative humidity)
• Curing time: ± 3 mm in 24 hours (at 23°C / 50% relative humidity)
• Minimum joint width: 4 mm
• Maximum joint width: 25 mm
• Maximum admissible deformation: 25%
• Paintability: Suitable for almost all modern water-based and 2K paint systems. Can be sprayed over wet-on-wet after 10 minutes, without drying delay. If you want to spray with 2K lacquers after 4 hours, then apply a plastic primer first (Innotec Repaplast Primer). Due to the huge variety of paint types on the market, it is best to test the paint beforehand.
• Cleaning of materials used: With Innotec Multisol
• Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
• Shelf life: 1 year in original, unopened packaging
• Storage conditions: Store cool and dry
• Type of batchcode: F
• CE Certification: Innotec Inno-Seal is a product with CE mark in accordance with Regulation (EU) 305/2011!
  The corresponding Declaration of Performance (DoP no 0124320100) can be downloaded from our website.
• EAN Code: 5400563004869