Total Power Grease

Description

Total Power Grease is an extremely high-quality grease, which, due to its excellent pressure and temperature resistance, is ideal as a universal lubricant. When being applied the product initially is liquid, so it can penetrate deeply between the parts. After the propellant has evaporated away it leaves a solid and pressure-resistant grease behind.

These properties make Total Power Grease extremely well suited to the lubrication of parts where metal rubs on metal.

What typifies maintenance work is the large variety of lubricating points. By virtue of its properties Total Power Grease is ideal for lubricating door catches, window mechanisms, pedals, hinges, gear wheels, brake parts, bearings, chains, etc. where it is important to provide lubrication between and not on the metal parts. Moreover, Total Power Grease is of a light colour, so it is perfect for use on visible parts too.

Total Power Grease is very resistant to high pressure and high temperatures (up to 230°C peak load). Due to its special composition the product is water-repellent and offers good protection against corrosion, even though it does not affect rubber and plastic.

Thanks to the unbreakable nozzle with straw, even hard-to-reach places can be treated without any problem. In addition, the aerosol is equipped with a special valve that allows it to be used in any position. This is a huge advantage with difficult-to-access places such as lubrication points on the underside of machinery.

Properties

• Easy to apply; sprays in all positions.
• Acid free, so safe on plastics.
• High pressure resistance.
• Light in colour.
• Very wide temperature range (-20°C to +160°C).
• Peak load of 230°C.
• Resistant to cold and warm water.
• Resistant to weak acids.
• Good anti-corrosion effect, especially on copper and steel.
• Does not harden.

Instructions for use

• Surface preparation: The surface must be clean, dry, free of grease and non-corroded. Clean surfaces with Innotec Multisol, Innotec Ultra Clean or Innotec Power Clean.
• Application method: Shake well before use. Spray directly on the part to be lubricated and leave a short time to evaporate.

Technical information

• Base: Oils, calcium complex soap and EP additives
• Density: 644 kg/m³
• Consistency: Pasty
• Viscosity: 1-2 (NLGI)
• Flash point: < 0°C
• Pressure resistance: Very good, due to the addition of EP additives. 4 ball welding load: ± 250kg (according to IP-239)
• Temperature resistance: -20°C to +160°C
• Peak temperature resistance: 230°C
• Drop point: > 250°C
• Water resistance: Good, resistant to cold and hot water
• Acid resistance: Good, resistant to weak acids
• Corrosion resistance: Very good, especially for copper and steel
• Mechanical stability: Good
• Penetration ability: Very good
• Percentage of greasing agent: 17,3%
• Application conditions: -20°C to +40°C
• Type of surface: All kind of metals
• Surface preparation: The surface must be clean, dry, free of grease and non-corroded. Clean surfaces with Innotec Multisol, Innotec Ultra Clean or Innotec Power Clean.
• Application method: Shake well before use. Spray directly on the part to be lubricated and leave a short time to evaporate.
• Cleaning of materials used: With Innotec Multisol or Innotec Power Clean
• Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
• Shelf life: 2 years in original, unopened packaging
• Storage conditions: Store cool and dry
• Type of batchcode: F
• EAN Code: 5400563014974