Fibres

Description

The Fibres are part of the Innotec Velours Repair System and a mix of nylon and viscose, used to fill upholstery damage for a professional result. The fibres come in 20 colours and can be mixed with each other to compose new colours.

See also: Velours Repair System

Properties

No product information available

Instructions for use

• Surface preparation: The surface must be clean, dry and free of grease. Clean upholstery with Innotec Remover and leave to evaporate for 2 minutes.
• Application method: Apply a small amount of Innotec Base Glue to the repair area and press the Fibres into the glue. Repeat this treatment until you reach the level just under the original cover. Finish the repair with Innotec Top Glue. See the directions for use of the Innotec Velours Repair System.

Technical information

• Base: Nylon and viscose
• Temperature resistance: -30°C to +90°C
• UV resistance: Good
• Water resistance: Good
• Application conditions: +15°C to +30°C (Innotec Base Glue and Innotec Top Glue)
• Type of surface: Almost all upholstery
• Surface preparation: The surface must be clean, dry and free of grease. Clean upholstery with Innotec Remover and leave to evaporate for 2 minutes.
• Application method: Apply a small amount of Innotec Base Glue to the repair area and press the Fibres into the glue. Repeat this treatment until you reach the level just under the original cover. Finish the repair with Innotec Top Glue. See the directions for use of the Innotec Velours Repair System.
• Cleaning of materials used: With Innotec Remover
• Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
• Shelf life: Unlimited in original, unopened packaging
• Storage conditions: No restriction