Foundation

Description

Foundation is part of the Innotec Velours Repair System. It reinforces textiles to help build up upholstery repairs.

See also: Velours Repair System

Properties

No product information available

Instructions for use

• Surface preparation: The surface must be clean, dry and free of grease. Clean upholstery with Innotec Remover and leave to evaporate for 2 minutes.
• Application method: Cut out a circle of Foundation that is approximately 5 mm greater in circumference than the hole. Make an incision between the filling and the cloth around the damage. Bring the Foundation in the incision between cloth and filling by using the included Spatula. Put the tube opening of the Innotec Base Glue between the cloth and the Foundation and apply a small amount of Innotec Base Glue around the repair area to glue the Foundation. Put the repair under light pressure and let it dry for 5 minutes. Finish the repair with Innotec Base Glue and Innotec Fibres. See also the directions for use of the Innotec Velours Repair System.

Technical information

• Base: Mixture of polyester, viscose and acryl
• Density: ± 50 g/m²
• Dimensions: 15 cm x 15 cm
• Application conditions: +15°C to +30°C (Innotec Base Glue)
• Type of surface: Almost all modern upholstery systems
• Surface preparation: The surface must be clean, dry and free of grease. Clean upholstery with Innotec Remover and leave to evaporate for 2 minutes.
• Application method: Cut out a circle of Foundation that is approximately 5 mm greater in circumference than the hole. Make an incision between the filling and the cloth around the damage. Bring the Foundation in the incision between cloth and filling by using the included Spatula. Put the tube opening of the Innotec Base Glue between the cloth and the Foundation and apply a small amount of Innotec Base Glue around the repair area to glue the Foundation. Put the repair under light pressure and let it dry for 5 minutes. Finish the repair with Innotec Base Glue and Innotec Fibres. See also the directions for use of the Innotec Velours Repair System.
• Cleaning of materials used: With Innotec Remover
• Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
• Shelf life: Unlimited in original, unopened packaging
• Storage conditions: No restriction
• EAN Code: 5400563025697