Easy Seal XS 310 ml Anthracite

Description

Easy Seal XS is a unique plasticizer-free joint sealant that retains its elasticity. Therefore, it is very well suited for bathroom materials, natural stone, etc. The product is low-odour and free of solvents and MEKO which makes it safe to use even on very sensitive surfaces. Easy Seal XS has good adhesion to various surfaces like natural stone, concrete, ceramic tiles, glazed tiles, mirrors, glass, wood, metals and many plastics.

This neutral curing sealant is ideal to seal a variety of expansion, construction and connection joints. Since the product retains its elasticity, it is perfectly suited for being used in applications subject to a maximum of 20% settling. Easy Seal XS does not smear and, thanks to its neutral composition, it does not affect metals or sensitive surfaces in e.g. bathroom or kitchen. After curing, the product gives a beautiful and deep UV resistant shine. In addition, Easy Seal XS is perfectly colourfast.

The handy packaging in 310 ml cartridges makes Easy Seal XS easy to use and economical. For best results we recommend to apply Easy Seal XS using the InnoQuip Pro 2000 Gun, Easy Grip Gun or Air Sealant Applicator 300 and to smooth off with Seal Fluid.

Easy Seal XS is part of the Innotec joint and sealant system. In combination with Innotec Back Fill Foam, Seal Guard and Seal Fluid, this system is the solution for seams and joints subject to high deformation.

Properties

• No staining or edge contamination on natural stone.
• Low-odour, solvent- and MEKO-free.
• Very good UV resistance.
• Retains its elasticity.
• Good adhesion to most surfaces.
• Simple to use.
• Fast skin formation.
• Sanitary properties; to prevent the sealant joint from being attacked.
• Perfectly usable in and around basins (see Technical Info Sheet).
• Temperature range of -40°C to +150°C.
• OEM approved.
• EMICODE EC1 Plus certified (licence number 12202/13.04.18).

Instructions for use

• Surface preparation: The surface must be clean, dry and free of grease. Clean surfaces with Innotec Multisol or Innotec Seal and Bond Remover. Plastic, porous or extremely difficult surfaces must be pre-treated with Innotec Repaplast Primer ou Innotec Seal Guard.
• Application method: Apply Easy Seal XS directly from the cartridge using a sealant gun (InnoQuip Pro 2000 Gun, Easy Grip Gun or Air Sealant Applicator 300). If necessary smooth with Innotec Seal Fluid.

Technical information

• Base: Alcoxy
• Density: ± 1010 kg/m³
• Consistency: Pasty
• Solvents: No solvents
• Hardness: ± 25 (Shore A)
• Tensile strength: ± 0,52 N/mm² (according to DIN 53504)
• Elongation at break (%): ± 215% (according to DIN 53504)
• Modulus: ± 0,36 N/mm² (at 100% elongation) (according to DIN 53504)
• Shear strength: 0,6 N/mm² (according to DIN 53283)
• Elastic recovery: ± 100%
• Temperature resistance: -40°C to +150°C
• UV resistance: Very good
• Water resistance: Very good
• Solvent resistance: Good, resistant against different solvents
• Fungus resistance: Very good
• Slump resistance (stability): Good
• Tests: EMICODE EC1 Plus certified (licence number 12202/13.04.18)
• Application conditions: +5°C to +30°C
• Type of surface: The most common building materials such as natural stone, concrete, ceramic and glazed tiles, mirrors, glass, wood, metals and many plastics
• Surface preparation: The surface must be clean, dry and free of grease. Clean surfaces with Innotec Multisol or Innotec Seal and Bond Remover. Plastic, porous or extremely difficult surfaces must be pre-treated with Innotec Repaplast Primer ou Innotec Seal Guard.
• Application method: Apply Easy Seal XS directly from the cartridge using a sealant gun (InnoQuip Pro 2000 Gun, Easy Grip Gun or Air Sealant Applicator 300). If necessary smooth with Innotec Seal Fluid.
• If applied in pools/basins: Make sure the surface is clean, dry and free of grease. Always use a suitable primer (e.g. Innotec Seal Guard). Use Innotec Back Fill Foam to dimension the joint exactly and/or to prevent three point adhesion. Advice: max joint depth = (width/3) + 6 mm. Easy Seal XS should only be immersed after thorough drying.
• Skin formation: After ± 10 minutes (at 23°C / 50% relative humidity)
• Tack free: After 60 minutes (at 23°C / 50% relative humidity)
• Curing time: ± 2 mm in 24 hours (at 23°C / 50% relative humidity)
• Minimum joint width: 4 mm
• Maximum joint width: 20 mm
• Maximum admissible deformation: 20%
• Paintability: Not paintable
• Cleaning of materials used: With Innotec Multisol
• Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
• Shelf life: 1 year in original, unopened packaging
• Storage conditions: Store cool and dry
• Type of batchcode: F
• Other details: Smoothing with Seal Fluid on natural stone can cause discolouring as a cause of the Seal Fluid. As a result of the continuously changing water quality in pools and bassins, the lifetime of Easy Seal XS cannot be defined univocally if the product is applied in pools/basins.
  OEM approved
• CE Certification: Easy Seal XS is a product with CE mark in accordance with Regulation (EU) 305/2011:
  CE EN 15651-1:2012, F INT-EXT 20LM
  CE EN 15651-3:2012, XS1
  The corresponding Declaration of Performance (DoP no. 0114530100) can be downloaded from our website.
• EAN Code: 5400563002254